It's a pleasure to introduce the new 20/20 phono preamp. It's AC powered and it is quiet! It starts with separate external AC power modules for each channel, followed by 10 sections of passive RC filtering and finalized with local constant voltage shunt regulation.
The 20/20 Phono Stage from Sutherland Engineering is the ultimate in channel separation! Derived from the best elements of the PH3D and the Hubble, the 20/20's signal path is almost the same as the Hubble; the construction is as simple as the PH3D. The 20/20 has an elegant esthetic of performance, value, craftsmanship and minimalism.
That heritage, however, does not keep the 20/20 design from taking on its own unique character:
First. Everyone wants the advantages of AC power line isolation offered by battery operation. The 20/20 is for the person who wants those advantages, but does not want to mess with batteries. The 20/20 comes as close as possible to offering an equivalence of battery isolation from AC line power.
Second. Two-Mono (definition: bumping it up from dual-mono) construction. The 20/20 is literally two identical mono phono stages. Each channel is on its own circuit board, has its own shielded compartment, power indicator, its own AC power supply and its own power cord. It is the ultimate in channel separation.
Gain Options: 40 dB, 46 dB, 52 dB, 58 dB, 64 dB
Loading Options: 47.5 k Ohm, 1 k Ohms, 475 Ohms, 200 Ohms, 100 Ohms
Dimensions: 17" x 2 1/2" x 12"
Remove cover. Set gain and loading for each channel with movable shunts. It is OK to change settings with power applied - JUST MAKE SURE to turn down volume control while changing. Plug in power supplies to each channel. Power jack on each circuit board is located at the front. The unit will be muted for about 30 seconds after power is applied. It takes a long time for charge to travel thru all the filtering and ramp up the operating voltage.