Description:
One of the most senior tonearm designers in Japan, with nearly 40 years of experience, has been kind to develop these new tonearms specifically for export by Sibatech. These tonearms, with competitive pricing and good value, are the TA-1 and SA-1.
The following features are shared between these two tonearms:
-
Both are machine-tooled and hand-assembled by skilled Japanese craftsmen. This highly skilled and delicate hand-assembly differentiates Abis tonearms from similar mass-produced Japanese tonearms. Standard quality high-volume tonearms are produced by die-casting and semi-automatic assembly line processes to keep production costs low.
-
Skilled hand assembly does not simply mean “combining the constituent parts by hand”. Skilled hand assembly involves measurement, adjustment and hand-fitting to produce optimal interface between machined surfaces. Once completed, the fitment between every part is ideal, satisfying the necessary conditions for vibration-free and noise-free reproduction of analog sound.
-
Most importantly, the key to tonearm quality is highly sensitive and delicate motion, for which the bearings are the determining factor.
-
Concerning the reproduced sound from these models: The designer is confident you will get precise and clean sound, which can only be had from hand-made tonearms, but at a very reasonable price with these arms.
-
In particular, the SA-1 will produce rich and tight bass, coming from the extremely rigid rectangular shaped arm-wand.
SA-1.2 tonearm:
* The major key to tonearm quality is the sensitivity and stability in retrieving delicate signals, for which the bearings are the determining factor. The SA-1 employs miniature radial bearings for both horizontal and vertical movement. Very high performance is achieved at a reasonable price.
* The rectangular arm-wand is machined from a solid aluminum block having an advantage in rich and tight bass reproduction, as bass sound is mainly recorded in the horizontal plane of the groove.
* Tonearm wires run through separate aluminum tubes inside the arm so that stereo separation is maximized.
* Reproduced sound is precise and clean, thanks to hand assembly by highly skilled craftsmen.
* Comes with detachable headshell, phono cable (RCA output plug, or optionally as XLR), screws, washers, wrench and marking pin.
Specifications |
Length: |
310mm |
Spindle center to arm pivot distance: |
223mm |
Stylus to pivot distance: |
239mm |
Overhang: |
16mm |
Cartridge weight: |
15-45 grams, including headshell |
Net weight: |
750g (with headshell attached: 767g) |
|