Home About Element Acoustics News Product Audio Visit Forum Contact Us
Products
Analog
Amplifier / Pre-amplifier
Cable
Digital
Headphones
Power Treatment
Speaker
Pre-owned Audio
.................................................
Acoustic Treatment
AC Power Accessories
Bulk Cable
Connector / Connector caps
Damping / Isolation
Furniture
Record / Disc Care
Tubes / Tube Rings
TuningTweak / Accessories
..................................................
Audio Visit
Subscribe Element Acoustics Newsletter
 
Products - Contact Enhancer
 
Product Brand : Walker Audio
Product Name : Extreme SST
Product Genre : Contact Enhancer
Condition : NEW
Description:
While developing SST – Super Silver Treatment, we tested many types of conducting substances and carrier fluids. We chose an ultra-pure, thin, long micron-sized silver flake suspended in an organic fluid for its dielectric characteristics and excellent sound. We believe E-SST/SST are vastly superior compared to any contact treatment on the market today.

Most contact treatments on the market are either cleaners or lubricants. They are not conductive. E-SST/SST is highly conductive and must be applied with care according to directions.

E-SST/SST will dramatically improve the sound and/or video of any system. The highs will be more extended, cleaner, clearer and better focused. The mid-range will be more transparent with more articulation and detail, yet without harshness or glare. The bass will be stronger, tighter, and quicker. The soundstage will take on a more natural presence. With video systems, the sound improvement will be matched by the improvements to the video. Look for a cleaner, more three-dimensional picture.

Treating Interconnects
Use one of the supplied applicators to apply a very small amount of E-SST/SST to the male end of the interconnect. Spread it thinly on about ½ or ¾ of the length of the center pin. Apply E-SST/SST to the outside only of the female end in a thin even coat. Now, plug in your interconnect and listen. On XLR interconnects, apply to male pins only. DO NOT put the applicator into the RCA or you will short it out.

Treating Power Cords
Apply a thin even coat of E-SST/SST to the male ends only. Cover both sides of the pins about half the length of the pins. On the I.E.C. male end at the component, do the same. Use only a very small amount. Do not over apply.

Treating Speaker Cables
Apply a thin even coat of E-SST/SST to the contact area of the spades or bananas.

Treating Tubes
We experienced a big improvement when we applied E-SST/SST to the pins of the tubes in our amplifiers. We suggest cleaning the pins with fine sandpaper in the direction on the pins. Clean with a contact cleaner, then apply a thin, even coat of E-SST/SST to about 2/3 the length of the male pin.

Video/Other Uses
E-SST/SST works great on video connectors. Apply to the male pins and the outside of female connectors. E-SST/SST also works on fuses and any contact device.
 
  Walker Audio E-SST
Price (MSRP)  
CAD 235.67
USD 185.00

  Bestsellers
Critical Mass Systems - Center Stage 2
Mobile Fidelity - MFSL Original Master Sleeves
IsoAcoustics - OREA Series
VPI Industries - Concentrated Record Cleaning Fluid
Mobile Fidelity - Master tracker MM cartridge
  New Listings
Vertere Acoustics - Techno Mat
PRE-OWNED - Sennheiser HD-800 headphone (USED)
Furutech - NCF Booster Brace
PRE-OWNED - Audioquest COFFEE HDMI cable (USED)
Nagra - Classic Phono
Return & Exchange Policy Shopping Guide Pre-Owned Policy Contact Us

Copyright © 2009 element-acoustics.ca Design by virtualhost