Home About Element Acoustics News Product Audio Visit Forum Contact Us
Products
Analog
Amplifier / Pre-amplifier
Cable
Digital
Headphones
Power Treatment
Speaker
Pre-owned Audio
.................................................
Acoustic Treatment
AC Power Accessories
Connector / Connector caps
Damping / Isolation
Furniture
Record / Disc Care
Tubes / Tube Rings
TuningTweak / Accessories
..................................................
Audio Visit
Subscribe Element Acoustics Newsletter
 
Products - Speaker - Floor Stand
 
Product Brand : Borresen
Product Name : X6 Loudspeakers
Product Genre : Speaker
Condition : NEW
Description:

A revolution in quality, performance and price 

Børresen has developed a new intro-level speaker series at an affordable price, making the Børresen speaker universe accessible to even more people. The Børresen X6 loudspeaker has been designed on the solid foundation of Børresen Acoustics’ development traditions, design philosophy and technological know-how.

The Børresen X series loudspeakers are not only a new entry-level into the Børresen universe, but also represents a real revolution in quality and performance in its price range. These speakers are created based on all the knowledge collected in the process of the creation of the M, 0 and Z-series. You´ll find components from these exclusive series in this Børresen X series loudspeakers – for instance the brand new Spread-tow carbon membrane, the highly praised Børresen ribbon tweeter and the use of copper caps in the magnetic motor system.

X series membrane – Bass/midrange

This membrane is designed to achieve maximum stiffness with minimum noise. The technological requirements for this unrivaled high-end membrane performance made it necessary to design, develop and assemble all components in-house.

The X3 membrane that consists of three skins laminated into a single unit: two layers of spread carbon fiber, with a layer of aramid honeycomb spacers in between.

The combination of these materials gives this membrane its unique properties. The spread-tow carbon fiber was designed to provide a skin with optimal stiffness. This unique feature of the membrane reduces sound-disturbing vibrations and resonances to unprecedented levels. The aramid honeycomb also has the best stiffness-to-weight ratio in the vertical direction. A flat response membrane in terms of resonances paved the way to build a very transparent loudspeaker with a reduced size of the magnetic motor system to optimize costs

X series magnet system – Bass/midrange

In the X3 magnet motor system, we use double copper caps on the pole rings to achieve high flux and low inductance. The use of copper caps has been adopted from the Børresen Z-series. Copper produces a response to flux changes – the better the counter-effect of these copper rings, the flatter the inductance curve, and the lower the electro-magnetic resonance. In addition, lower inductance also means fewer spikes in the impedance curve. Both result in a lower load on the amplifier. To ensure high efficiency, the X3 has two pole rings. This causes the loss of some flux, which reduces efficiency, but this is compensated for by a larger magnet.

X series Børresen tweeter

The tweeter chosen for the Børresen X3 has the same design used in all other Børresen loudspeaker series. However, there is a reduction in magnet and iron mass. This is possible due to the extremely high efficiency of the original tweeter design. As a result, the efficiency has dropped only slightly from the exceptional 94 dB to 90 dB, but this is still an amazing efficiency for a tweeter.

The tweeter operates from about 2.5 kHz upwards. The moving mass is extremely low at 0.01 grams. The fully concealed tweeter can operate at an impressive speed. The high robustness of this tweeter allows it to handle very high transients without causing any deafening dips.

X series cross-over

The Børresen X3 is equipped with a parallel crossover built with the same high-quality components from the Z Series. This makes for a very mechanically stable crossover that minimizes its self-resonance.

The X6 driver configuration

The X6 is equipped with 6 of the 4.5″ X-series drivers. These drivers are interconnected so that two units work together as bass/midrange and 4 units work together as bass speaker drivers. This approach ultimately results in increased speed, precision, and depth, which enriches the speaker with much more musicality.

X series cabinet

The surface of the cabinet is finished in black or white piano lacquer and reinforced with carbon fiber inserts. The cabinet is made of a heavily braced wood composite material that has the property of eliminating sound distortion. The material used for the cabinet also reduces mechanical influences, especially hysteresis. The sonic result is clearly audible. The Børresen X3 cabinet has six bass reflex ports. The tweeter is vented to compensate for the air pressure that builds up. The bass section consists of tuned ports calibrated for musically relevant frequencies.

 

 

 
  Borresen X6 Loudspeakers (white gloss)
Price (MSRP)  
CAD 30000.00 Special Order
USD 22050.00
  Borresen X6 Loudspeakers (black gloss)
Price (MSRP)  
CAD 30000.00 Special Order
USD 22050.00

  Bestsellers
Western Electric - 300-B Vacuum Tube
Technics - SL 1200 M7 Direct Drive Turntable (Limited Edition)
Focal - Headphone - Bathys headphone
Dynavector - DV 20X2
Sennheiser - Sennheiser 820 headphone
  New Listings
Nagra - HD Phono
PRE-OWNED - Soulution 330 integrated with phono (USED)
PRE-OWNED - Soulution 725 Preamplifier (USED)
Burmester - Burmester 039 5 Channel Amplifier (DEMO)
- Nagra Classic DAC mk1 (USED)
Return & Exchange Policy Shopping Guide Pre-Owned Policy Contact Us

Copyright © 2009 element-acoustics.ca Design by virtualhost