HRS is excited to announce our new Vortex. This product is designed specifically to obtain maximum performance from stiffer chassis construction while used in conjunction with the HRS Isolation Bases. A stiffer chassis is constructed by plate or billet metal parts and is not of standard sheet metal construction. The Vortex is to be placed in direct contact of the chassis, not under existing component feet with the point of the Vortex in contact with the HRS Isolation Base and the large diameter in contact with the component chassis.
Currently the Vortex will be available in one size, V150, which will have a height of 1.5”. A 2 inch version will be available in mid 2016.
The Vortex is available in a fixed height as well as an adjustable height which is centered on a 1.5” height. It is only manufactured in a natural steel finish.
The Vortex is designed to be sold in sets of 4, which include 3 Fixed Height Vortex (V150) and 1 Adjustable Height Vortex (V150A). They can also be ordered separately.
Three fixed height Vortex’s (V150) are the number of fixed height units that should be used under a chassis to make sure that the system is stable. After placing 3 of the V150 fixed height Vortex’s under a chassis, then each additional Vortex added after the first 3 must be the adjustable V150A model. This will ensure intimate contact between each Vortex unit and the bottom chassis of the component.
V150 / V150A
Height - 1.5"
Diameter - 3.5"
Weight - 914 grams