We are very pleased to announce a major revision and replacement to our Center Stage2 audio feet. Each Center Stage2 model has been improved and replaced by Center Stage^2M.

There were several objectives behind the development of Center Stage^2M. Firstly, we wanted to build upon the proven approach developed for the LS (loudspeaker) series of Center Stage² products.

Secondly, each new Center Stage^2M product had to be a clear audible improvement over its current facing Center Stage² relative. In other words, compared to the current CS20.8, CS2 1.0 and CS2 1.5, each new Center Stage2M had to be greatly improved across the audible spectrum.

Finally, and most important, we wanted the performance improvement of each new Center Stage2M product to be so great, it leapfrogged its bigger brother in the current CS2 line up. In better words, the Center Stage^2M 0.8 had to be better than the CS2 1.0. The Center Stage^2M 1.0 had to be better than the CS2 1.5 and the Center Stage^2M 1.5 had to set a new standard for audio footer performance in the industry.

Center Stage^2M accomplishes every objective we set by a wide margin. We are thrilled with Center Stage^2M and we hope you will give them a try throughout your system. The “M” stands for “MAXX”.

Center Stage^2M is direct trickle-down technology garnered from advancements made in the development of the Center Stage² LS series of loudspeaker feet. The LS series of Center Stage² products reduce stored loudspeaker cabinet resonances and entropy to a vanishing level resulting in enhanced clarity and musicality across the audible spectrum.

Rather than approaching the problem of reducing vibration using new untested methodologies, we decided to “use the advancements we knew worked well with loudspeakers”. We used tested design fundamentals resting within the discipline of material science to determine the correct sequencing of the Center Stage^2M materials. We established the proper proportions of the materials. And, we added damping in the very last stage in an amount that would eliminate the internal noise of the product and the component without rolling off the top end of the acoustic envelope.

Center Stage^2M helps components reach their engineered potential in 3 ways. First, they mitigate vibration coming up from the surface below them. Second, they cancel out their own noise. This very difficult accomplishment ensures truth to source material and truth to component engineering design. Third, they transfer entropy out of the component. This feature requires time and is the reason for the extended settling process.

It might be more appropriate to view Center Stage^2M as the counterbalance to a destructive energy cycle within your components. Center Stage^2M will greatly reduce unwanted damaging energy and permanently hold a more peaceful state of equilibrium. The pleasant surprise is the wonderful sonic envelope that results.

MUST be sold in sets of 4 to get maximum effect.  3 is not recommended.